SpoolinUp LLC

	GM IAT Sensor Standard GM IAT Sensor. Choose with or without connector. Connector available alone below.
	ARP Crank Pulley Bolts Kit includes ARP Bolts, Washers, and Lock Washers. 10mm 12-point head. Torque to 30 ft/lb. Use Blue Loctite if desired.
	Toyota Denso Coil Connector Easy to use crimp-on connector for 20ga (18 ga Tefzel) wire and larger. Comes with 1 Connector, 4 Seals and 4 Terminals. Typically four are needed. Priced per unit.
	EVO 4-10 Coil Connector - Crimp Easy to use crimp-on connector for 18ga (16 ga Tefzel) wire and larger. Comes with 1 Connector, 3 Seals and 3 Terminals. Typically two are needed. Priced per unit. These are used when making a COP kit harness.
	CDI Coil Connector Easy to use crimp-on connector for 300m Chrystler coils commonly used in CDI applications. Comes with 1 Connector, 2 Seals and 2 Terminals. Typically four are needed. Priced per unit.
	EVO 4-10 Coil Connector Easy to use crimp-on connector for 20 ga (18 ga Tefzel) wire and larger. Comes with 1 Connector, 3 Seals and 3 Terminals. Typically 1-4 are needed. Priced per unit. These are used when replacing the coil connector on your factory harness.
	EVO 4-10 Coil Connector - Solder Solder on connector for use with any gauge and/or number of wires. Comes with 1" Viton heat shrink to protect after soldering. Typically two are needed. Priced per unit.
	EVO 4-9 COP Carbon Fiber Plate Pre-cut or Un-Cut 2x2 weave 4mm think Carbon Fiber sheet. Can be used for any type Coil on Plug system.	$60 Shipped. Previous customers only at this time. Please Contact Me.
	EVO 4-9 COP Aluminum Plate Un-cut natural finish aluminum plate. Can be used for any type Coil on Plug system.
	EVO 8-10 BCS Connector Don't butcher your wiring harness! Comes one Connector, 2 Seals and 2 Terminals. Typically only one needed. Priced per unit.
	GM BCS Connector Comes with two crimp-on terminals, two seals, and one connector housing. Typically only one is needed. Priced per unit.
	GM IAT Connector Comes with two crimp-on terminals, two seals, and one connector housing. Typically only one is needed. Priced per unit.
	Male Metripack Connector This 3-Way Connector comes with three crimp-on terminals, three seals, and one connector housing. These are for general use. Priced per unit.
	Female Metripack Connector This 3-Way Connector comes with three crimp-on terminals, three seals, and one connector housing. These are for general use. Priced per unit.
	1/8" NPT 1/4" Hose Barbs Hard to find low profile barb perfect for a vareity of applications. Still less costly than bulky hardware store junk fittings.
	BCS Resistor 1 Watt 1% Tolerance. Get your BCS resistance dead on with the factory solenoid to avoid ECU damage. Comes with Heat Shrink. 8.2 ohm resistor for GM Solenoid 6.2 ohm resistor for AEM/MAC 35A Solenoid
	18 GA Black Tefzel Wire Tefzel (Teflon) 200º C MIL-SPEC Black 18 ga hookup wire. Tin coated core. 15 ft needed for COP. Sold by the foot.
	Black Saturated Fray Resistant Fiberglass Sleeve 4ga (.208" ID) 240°C Fiberglass Sleeve impregnated with acrylic resin binder to provide fray resistance and excellent resistance to moisture, fungus and chemical attack. 4 ft needed for COP. Sold by the foot.
	High Temperature Split Loom Tubing 3/8" Black High Temperature Split/Slit Loom tubing is best used when the loom will be exposed to elevated temperatures, such as industrial and automotive applications. It offers a little more rigidity and protection over the standard black wire loom. Sold by foot.