


![]() |
GM BCS
Classic GM Boost Control Solenoid.
Connector available on the Connectors page. Adapter harness available on main Product page.
|
|
![]() |
GM IAT Sensor
Standard GM IAT Sensor. Choose with or without connector.
Connector available alone below.
|
|
![]() |
IAT Bung
3/8" NPT Bung for use with GM IAT sensors. Choose metal type.
|
|
ARP Crank Pulley Bolts
Kit includes ARP Bolts, Washers, and Lock Washers. 10mm 12-point head. Torque to 30 ft/lb. Use Blue Loctite if desired.
|
||
![]() |
EVO 4-9 COP Carbon Fiber Plate
Pre-cut or Un-Cut 2x2 weave 4mm think Carbon Fiber sheet. Can be used for any type Coil on Plug system.
|
$60 Shipped. Previous customers only at this time. Please Contact Me.
|
![]() |
EVO 4-9 COP Aluminum Plate
Un-cut natural finish aluminum plate. Can be used for any type Coil on Plug system.
|
|
1/8" NPT 1/4" Hose Barbs
Hard to find low profile barb perfect for a vareity of applications. Still less costly than bulky hardware store junk fittings.
|
||
![]() |
BCS Resistor
1 Watt 1% Tolerance. Get your BCS resistance dead on with the factory solenoid to avoid ECU damage. Comes with Heat Shrink.
8.2 ohm resistor for GM Solenoid
6.2 ohm resistor for AEM/MAC 35A Solenoid
|
|
18 GA Black Tefzel Wire
Tefzel (Teflon) 200º C MIL-SPEC Black 18 ga hookup wire. Tin coated core. 15 ft needed for COP. Sold by the foot.
|
||
![]() |
Black Saturated Fray Resistant Fiberglass Sleeve
4ga (.208" ID) 240°C Fiberglass Sleeve impregnated with acrylic resin binder to provide fray resistance and excellent resistance to moisture, fungus and chemical attack. 4 ft needed for COP. Sold by the foot.
|
|
![]() |
High Temperature Split Loom Tubing
3/8" Black High Temperature Split/Slit Loom tubing is best used when the loom will be exposed to elevated temperatures, such as industrial and automotive applications. It offers a little more rigidity and protection over the standard black wire loom. Sold by foot.
|